Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Palm Bay Homeowners
A garage door that won’t open right, sags off its track, or lets water in every time it rains is a daily problem, not a someday problem. Most Palm Bay homeowners we talk to have already tried tightening something, oiling something, or living with the noise. What they actually need is a door that fits the opening, works with their opener, and holds up in Florida’s heat and humidity without a second thought. Unity Garage Door Repair installs and replaces doors for homeowners and businesses across Palm Bay, and our technicians have up to 14 years of experience with the equipment in this market. We carry LiftMaster, Chamberlain, Genie, and Clopay because those are the names you’ll find in most Palm Bay garages, and we know how each one behaves over time. Every installation starts with a free measure and a written estimate, so you know the number before anyone touches your door. Call (866) 901-6506 to get scheduled. We answer 24/7, with fast dispatch from 7am to 7pm.
Garage Door Replacement
Garage Door Replacement is the full removal of an old door and its hardware, followed by a newly installed door built to fit the same opening. You need it when panels are cracked or rotted, the door has been hit and the frame won’t straighten, or when the whole thing has simply outlived its usefulness. It’s also worth it when repairs keep adding up faster than a replacement would. Unity Garage Door Repair handles the measure, the door selection, the removal, and the installation, so you’re not coordinating between a supplier and a separate installer. New door installation in Palm Bay typically runs $700 – $2200 depending on door size, material, insulation, and how much of the existing hardware and framing needs to be replaced. A written estimate sets the final price. We diagnose before we quote, so the number accounts for what your specific opening actually needs.
Single and Double Car Doors
Most Palm Bay homes have either a single-car opening or a wide double door, and the two take different approaches to reinforcement and spring sizing. A double door carries more weight and needs closer attention to balance and track alignment. We measure the opening and the headroom before recommending a door so the finished result operates without strain.
Choosing the Right Door Material
Steel, aluminum, and composite each behave differently in a hot, humid climate. Steel holds up well and takes a finish easily, while aluminum resists rust where moisture sits. We walk you through what fits your budget and how the door will be used, not what happens to be sitting in a warehouse.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Installation Service
A Garage Door Installation Service covers everything from the first measurement to the final balance check, and you’ll want one whenever a new door, opener, or full door-and-opener combination is going in. Some homeowners need a door swapped onto an existing track system. Others need the whole assembly, including springs, hardware, and opener, set up from scratch. Unity Garage Door Repair does both, and because we also handle garage door repair and opener work, there’s no handoff to a second contractor partway through. Installation pricing in Palm Bay starts around $700 and runs to $2200 depending on the door and the scope of the job. If the opener is being replaced at the same time, opener installation is typically $250 – $550. The estimate is free and the price is quoted and agreed before any work starts, so there are no surprises after the fact.
What the Measure Covers
We record the opening width and height, the headroom above the door, and the side clearance around the tracks. Those numbers decide which door models fit and how the springs get sized. Getting this right the first time is why a return visit usually isn’t needed.
Removing the Old Door Safely
Old doors are heavy, and the springs under tension are the most dangerous part of the job. Our technicians release tension correctly and take the panels down in sequence. This is not work to take on without the right tools and training.
Commercial Garage Door Installation
Commercial Garage Door Installation covers roll-up doors, sectional doors, and high-cycle setups for warehouses, storage units, and service bays. You need it when you’re outfitting a new space, replacing a door that’s been cycled thousands of times, or switching to a door rated for heavier daily use than a residential model. Commercial doors take different springs, heavier track, and often a different opener entirely, so the selection process matters more than the install itself. Unity Garage Door Repair works with the same brand families you’ll find on the residential side, including LiftMaster operators that are common in commercial settings, and we size the components to the traffic the door will actually see. Commercial installation pricing follows the same $700 – $2200 range as residential work, moving toward the higher end for larger openings and heavy-duty hardware. Your written estimate sets the final figure.
High-Cycle Hardware and Springs
Commercial doors open and close far more often than residential ones, which wears springs and rollers faster. We spec components rated for the cycle count rather than reusing residential-grade parts. That keeps the door working through a busy week.
Operator Sizing for Traffic
A door that runs dozens of times a day needs an operator built for it. We match the motor and duty rating to the actual usage pattern. Undersized operators are a common reason commercial doors fail early.
Garage Door Installation Contractors
Garage Door Installation Contractors are the crews who measure, supply, and set up the door, and choosing the right one matters as much as choosing the door. You need a contractor when you’re replacing a door, adding one to a new structure, or correcting work that was installed poorly the first time. Unity Garage Door Repair brings technicians with up to 14 years of experience, and we work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. That range matters because a specialist who only handles one brand will steer you toward that brand whether it fits or not. We’re not a dealer for any manufacturer, so recommendations are based on your door, your budget, and how you use the space. Costs depend on the job: panel replacement runs $250 – $500, and full installation sits in the $700 – $2200 range. The written estimate is the price.
What to Ask Before You Hire
Ask what brands the contractor works with and whether they handle openers as well as doors. A single company handling both means one point of accountability if something doesn’t line up. Ask for the written estimate in detail, including hardware.
Licensing and Insurance
Ask for proof that the contractor is properly licensed and insured before work begins. It protects you if something goes wrong on your property. Any reputable crew will provide it without hesitation.
Garage Door Seal Installation
Garage Door Seal Installation is the fitting of weather seals along the bottom, sides, and top of the door to block air, water, and debris. You need it when you can see daylight under the door, when the bottom seal is cracked or flattened, or when the garage stays hot and humid even with the door down. This is a small job with a real effect on how comfortable and dry the garage stays. Unity Garage Door Repair replaces bottom seals, side and top weatherstripping, and threshold seals depending on what’s worn out. Seal work usually gets bundled with a repair or installation rather than priced on its own, and if it’s part of a full door replacement, it’s built into the $700 – $2200 installation range. For standalone seal work, the written estimate covers it, and the price is agreed before any work starts. In a climate that swings between heavy summer rain and dry stretches, a seal that fits properly keeps the garage cleaner and cooler.
Spotting a Worn Bottom Seal
Look at the rubber strip along the floor when the door is closed. Cracks, flattening, or gaps at the corners mean it’s failing. A quick check during the day tells you plenty, since light under the door is the clearest sign.
Side and Top Weatherstripping
The strips along the jambs and header wear thin and let wind-driven rain in. Replacing them is straightforward once the door is properly aligned. We check alignment at the same time so the new seals actually contact the door.
New Garage Door Installation
New Garage Door Installation is the complete package: a new door, new springs, new track and hardware, and a balance check at the end. You need it when the existing door is beyond repair, when you’re building, or when you want a quieter, better-insulated door for a workspace or living area near the garage. Unity Garage Door Repair measures the opening, helps you choose a door that fits your home and how you use the garage, and installs it so it runs smoothly from the first cycle. We work with Clopay, Amarr, Wayne Dalton, and other major makes, so you’re not limited to whatever one supplier carries. New door installation in Palm Bay typically runs $700 – $2200, with size, material, insulation, and window options driving the number. The written estimate sets the final price, and it’s free.
Insulated and Non-Insulated Options
An insulated door keeps the garage cooler and cuts noise from the opener and street. Non-insulated doors cost less and suit storage use where temperature doesn’t matter much. We explain the tradeoff and let you decide.
Windows, Colors, and Curb Appeal
Windows add light and change how the front of the house reads. Color and panel style matter for resale as well as for how you feel pulling in each day. We can show what fits your home’s style without overselling extras.
Brands We Service
We work on LiftMaster and Chamberlain openers regularly, and both show up in a lot of Palm Bay garages. We know where their motors, logic boards, and safety sensors tend to fail, which shortens the diagnosis time. Genie equipment is another common one on our list, and its chain and belt drive systems behave differently enough that knowing the line saves guesswork. On the door side, we handle Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor with the same familiarity.
Brand knowledge changes the outcome in two ways: we diagnose faster because we’ve seen the failure pattern before, and we source the correct part the first time instead of ordering something close and hoping. We’re not a dealership for any manufacturer, so if your door is a Clopay and a replacement panel from another line makes more sense, we’ll tell you. The right fix for your door comes first. Whether you have LiftMaster, Chamberlain, Genie, Clopay, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The door won’t stay balanced halfway up. A door that drops or drifts when you let go has a spring problem. Springs under tension can cause serious injury, so stop using the door and have it checked by a trained technician.
- Visible gaps or daylight under the door. This points to a failed bottom seal or a door that’s out of alignment. Left alone, water and pests find their way in, and the garage stays humid.
- The door is visibly bent or the panels are cracked. Structural damage throws the door off balance and strains the opener. It won’t straighten itself, and it can fail at the worst moment.
- The opener strains, grinds, or reverses for no reason. That usually means the opener is fighting a door problem, not causing it. Diagnosing both together prevents replacing the wrong part.
- You’re planning to sell or refinance. A door that doesn’t operate correctly can stall an inspection. Getting it fixed or replaced ahead of time keeps things moving.
Our Process, Step by Step
- 1
Phone consultation and scheduling. We ask what’s happening with the door, how old it is, and what you’re hoping to do. That tells us whether this is a repair, a replacement, or a new installation, and we book the right visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
On-site measure and assessment. A technician records the opening dimensions, headroom, and side clearance, then checks the existing track, framing, and opener. We use a tape measure and a level, and we check the door’s balance by hand with the opener disengaged. Nothing is assumed from a phone description.
- 3
Written estimate, reviewed with you. You get the price in writing before any work begins. We explain what’s included, what isn’t, and why the recommendation fits your door and budget. The estimate is free and there’s no obligation.
- 4
Ordering and preparation. Installation work is measured, ordered, and scheduled, so the door and hardware arrive ready for the job. We confirm the date once materials are in. You’ll know what to clear from the garage before we arrive.
- 5
Installation and final balance check. The old door comes down, the new one goes up, and we run it through several cycles to confirm balance, alignment, and safety reversal. We test the opener travel limits and safety sensors before we consider the job done.
How Much Does Garage Door Installation Cost in Palm Bay?
A typical new door installation in Palm Bay runs $700 – $2200 depending on size, material, insulation, and whether the existing hardware can be reused. A basic single-car steel door sits toward the lower end, while a double door with insulation and windows moves toward the top. Panel replacement, when only part of the door is damaged, is usually $250 – $500. If an opener goes in at the same time, opener installation runs $250 – $550.
Several things move the number. Door size is the biggest factor, followed by material and insulation. Window inserts add cost. If the existing track is bent or the framing needs correction, that adds labor. Springs and hardware are usually included in a full installation but not in a panel swap.
To avoid overpaying, get the estimate in writing with the door model, hardware, and labor listed separately. Ask whether old door removal and disposal are included. If a contractor won’t put the breakdown in writing, that’s your answer.
A free estimate from us includes the on-site measure, a clear recommendation on door type, and a written price. Every price we quote is agreed before any work starts, so the invoice matches the estimate.
| Service | Typical Estimated Range |
|---|---|
| New door installation | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
Call (866) 901-6506 for an exact quote. Estimates are free.
Our Service Area Near Palm Bay
We work throughout Palm Bay and the surrounding communities, including Palm Bay itself, West Melbourne, Melbourne Beach, Indialantic, Indian Harbour Beach, June Park, Grant-Valkaria, Micco, and out toward Malabar and Vero Lake Estates. Installation work is scheduled after the measure and ordering, and we confirm timing when the job is booked. Repair calls get faster attention when you need one. Wherever you are in the area, one call gets the full picture handled.
Serving Palm Bay, FL – Our Local Coverage Area
We serve Palm Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Installation in Palm Bay
Garage door installation is the full process of fitting a new door and its hardware into your existing opening, including springs, track, and a balance check at the end. It’s different from a repair, which fixes a component on a door that’s otherwise sound. We measure the opening first, then install so the door runs smoothly from the first cycle. Call (866) 901-6506 to book a free measure.
Most residential installations take a few hours once the door and hardware are on site. The timeline depends on the door size, whether an opener is being replaced, and how much of the old framing needs attention. Commercial and oversized doors take longer. We confirm timing when the job is scheduled so you can plan your day. Call (866) 901-6506 for an estimate.
A typical new door installation in Palm Bay runs $700 – $2200, with size, material, and insulation driving the number. Panel replacement is usually $250 – $500, and adding an opener runs $250 – $550. Your written estimate sets the final price, and it’s free. Call (866) 901-6506 for an exact quote.
Yes, we service LiftMaster, Chamberlain, Genie, Clopay, and other major makes, and we’re not a dealer for any of them. That means our recommendation is based on your door and budget, not on moving a particular brand. Knowing the line shortens diagnosis time and helps us source the right part the first time. Call (866) 901-6506 to talk through your setup.
Same-day service is available for repair calls, and new installations are measured, ordered, and scheduled. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 901-6506 to get scheduled.
Warranty terms depend on the door and hardware being installed, and we’ll go over the details with your written estimate. We don’t make blanket warranty claims that don’t apply to your specific job. Ask when we quote, and we’ll explain what’s covered. Call (866) 901-6506 for details.
Clear the garage floor and any space directly under and around the door, and move vehicles out of the driveway. If there’s anything stored against the tracks or springs, move it before the technician arrives. That gives us clear access and keeps the job moving. Call (866) 901-6506 with any questions about the day.
Schedule Your Garage Door Installation Service in Palm Bay Today
Whether you need a repair, opener repair, or a full new door, Unity Garage Door Repair handles it under one company, with a free estimate and a written price agreed before work starts. Our technicians have up to 14 years of experience and work across the major brands. Call (866) 901-6506 to schedule your no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Written by the team at Unity Garage Door Repair.