Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Palm Bay?
Spring replacement in Palm Bay typically costs $180 – $340 for one spring, including the part and the labor to swap it. Because most doors run on two springs and they wear at the same rate, a matched pair is usually replaced together, which puts the pair at roughly twice that range. The written estimate you get on site sets the final price, and the numbers below are typical 2026 estimates for this market, not a quote.
If you’re hearing a sharp bang from the garage or the door won’t lift more than a few inches, stop pulling the opener and call (866) 901-6506. We answer 24/7 and dispatch runs fast from 7am to 7pm, Sunday through Friday. Estimates are free.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work and the parts around it line up in Palm Bay this year. Use these as planning ranges. A technician confirms the exact job before any work starts.
| Job | Typical Estimated Range | Notes |
|---|---|---|
| One torsion spring, replaced | $180 – $340 | Includes the spring and labor |
| Matched pair of springs | About twice the single-spring range | Standard for most two-spring doors |
| Extension spring, replaced | $180 – $340 per spring | Common on lighter single-car doors |
| Cable repair | $130 – $250 | Often paired with spring work when a cable is frayed |
| Roller replacement | $110 – $220 | Noisy or seized rollers found during the same visit |
| Track realignment | $120 – $240 | When the door has jumped or shifted |
| Panel replacement | $250 – $500 | Impact or storm damage, not spring wear |
| Opener repair | $120 – $320 | Separate issue, often confused with a spring failure |
| General garage door repair | $150 – $600 | Broad range for mixed repairs |
What pushes a spring job toward the top of its range? A door with two springs, a heavier insulated door, rust or binding in the torsion tube, or a spring that failed in a way that also stretched a cable. What keeps it low? A single-spring door, easy access to the torsion bar, and springs that fail cleanly on their own. We diagnose before we quote, so you’re not paying for parts your door doesn’t need.
Why one spring and a pair aren’t the same price
When one spring in a pair breaks, the other has cycled the same number of times. Replacing one and leaving the other is a short-term fix that tends to bring you back within months. That’s why we usually recommend the pair, and why we quote them as two separate springs rather than one job. If your door runs a single spring, you’re looking at the single-spring range.
What Affects Spring Replacement Pricing in Palm Bay
Several things move the number up or down. These are the ones we see most in Palm Bay.
- How many springs your door uses. Single-car doors often carry one spring; double-car and insulated doors usually carry two. The count is the biggest single factor in the total.
- Spring type and size. Torsion springs sit on the bar above the door. Extension springs run along the sides. They’re priced differently and take different labor.
- Door weight. Heavier doors and doors with glass or insulation need springs rated for more cycles. That changes the part cost, not the labor.
- Condition of the cables and drums. A spring that lets go often takes a cable with it or bends a drum. When that happens, the cable line item (usually $130 – $250) gets added.
- Access and clearance. Low-headroom setups and tight garages take longer to work in, and labor reflects that.
- Whether the opener was damaged. Running a dead door on the opener can strip its gear or burn the motor. If the opener needs repair too, that’s the $120 – $320 range on top.
Local housing plays a role. Palm Bay has a large stock of homes built across several decades, so doors range from older single-spring setups to newer insulated double-car doors. Older doors often need cable and roller attention at the same time as the spring. Newer doors usually just need the springs. Either way, the inspection tells us which.
How Long Does Spring Replacement Take?
Most spring replacements are done in a single visit, usually in under two hours once the correct springs are on hand. The technician measures the old springs, matches the wire size and length, winds the new ones, and cycles the door several times to check balance before calling it done.
Same-day service is often possible when you call early. Call (866) 901-6506. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Can You Replace a Spring Yourself?
No. Torsion springs are under extreme tension, and the winding process is the single most dangerous task in garage door work. A spring that releases unexpectedly can cause severe injury. There’s no safe shortcut here, and no DIY video makes the stored energy any smaller. Extension springs are lower tension but still carry enough force to hurt someone. This is work for a trained technician with the right winding bars and the right experience.
What you can do safely is check the door and stop using it. Look at the springs above the door for a visible gap in the coil. Listen for the bang. Try lifting the door by hand about a foot, and if it feels heavy or won’t stay up, leave it down.
How to Save on Spring Replacement
There’s no coupon needed to keep this affordable. A few practical habits do most of the work.
- Fix it before the opener breaks. Continuing to run a door with a broken spring usually damages the opener. Handling the spring alone costs less than the spring plus opener repair.
- Replace the pair together. It feels like more upfront, but it avoids a second service visit and a second labor charge months later.
- Group small fixes into one visit. If the rollers are noisy or a cable is frayed, have it handled while the technician is already there for the spring.
- Ask for the estimate in writing. A written estimate tells you the parts and labor up front, so there’s nothing to sort out after the fact.
- Don’t lubricate a broken spring and keep going. Lubrication helps a working door last longer. It does nothing for a spring that’s already cracked.
Estimates are free, and there’s no charge to have the job looked at and priced. Call (866) 901-6506 and we’ll schedule a visit.
Should You Repair the Spring or Replace the Door?
Repair the spring in almost every case. A spring is a wear part, and replacing it restores the door for the $180 – $340 range per spring. A new door is the $700 – $2,200 range and is only worth it when the panels are damaged, the door is badly out of square, or you’re changing the look of the house. If the door structure is sound, the spring is the answer.
If your door is older and you’re weighing options, a technician can tell you on site whether the panels and tracks are worth keeping. We’re not a dealership for any one manufacturer, so the recommendation fits your door and your budget rather than what’s sitting in inventory. We work on doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Brand Matters When the Spring Fails
Springs aren’t branded the way openers are, but the door and opener attached to them are, and that shapes the diagnosis. A Clopay or Amarr door with an insulated core needs springs rated for the extra weight. A LiftMaster or Chamberlain opener that’s been running against a dead spring may have a stripped gear rather than a motor problem. Knowing the brand and model shortens the diagnostic step and gets the right part the first time. That’s part of why we work across all eight major brands instead of specializing in one.
Opener issues are a specialty, not a side job. If the spring is fine and the door still won’t move, the trouble is in the opener, and we handle that too. You can read more about our Unity Garage Door Repair services to see the full scope.
What to Expect From the Visit
Here’s how a spring call usually runs in Palm Bay. The technician arrives, inspects the springs, cables, drums, rollers, and opener, and gives you a written estimate before touching anything. You approve the price, the work happens, and the door gets cycled and balanced before the technician leaves. If something else turns up, you hear about it before it’s added to the job, not after.
One call, fully resolved is the point of how we work. We’re set up to handle repair, opener repair, and full installation without handing you off to a second contractor. Our technicians have up to 14 years of experience with this equipment.
Safety first, every time
We flag anything that looks unsafe, including worn cables, bent tracks, or a door that’s out of balance. Springs are the dangerous part of a garage door, and a technician who takes the tension seriously is a technician worth having on the job.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Palm Bay?
One spring typically runs $180 – $340 in Palm Bay, and a matched pair costs about twice that. The written estimate sets the final price. Call (866) 901-6506 for an exact quote. Estimates are free.
Is it cheaper to replace one spring or both?
One spring is cheaper upfront at $180 – $340. Replacing both is usually the better value because springs wear together, and doing the pair once avoids a second visit and a second labor charge. Call (866) 901-6506 and we’ll tell you which applies to your door.
Can you come today?
Same-day service is often possible, especially if you call early. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 901-6506 to check the next opening.
Why did my spring break?
Springs break from cycle count, not age alone. A standard spring is rated for a set number of open-and-close cycles, and daily use adds up over years. Rust and lack of lubrication shorten that life. In Palm Bay’s humidity, springs on a door that never gets lubricated tend to give out sooner.
Does spring replacement include a new opener?
No. Spring replacement is the $180 – $340 range per spring and covers the spring and labor only. If your opener was damaged by running the dead door, opener repair runs $120 – $320 and is quoted separately. Call (866) 901-6506 for a free estimate on both.
How do I know the spring is the problem and not the opener?
A broken spring usually announces itself with a loud bang and a door that lifts only a few inches by hand. A failing opener usually shows up as a door that moves a little then stops, or a motor that hums without moving anything. A quick inspection settles it. Call (866) 901-6506 and we’ll diagnose before we quote.
Getting Your Door Back in Service
If your door is stuck and you’re in Palm Bay, the call is the fastest way to a real number. We give you a written estimate before any work starts, and the price on that estimate is what you pay. We work on your brand, from the spring to the opener, and we don’t hand you off.
Call (866) 901-6506 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you’re in Palm Bay or nearby, one call gets the job moving.
Pricing reflects the Palm Bay market as of 2026. Unity Garage Door Repair offers free estimates – call (866) 901-6506.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carmen Reyes"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Roger Brooks"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Jodi Doyle